Beschreibung
Dieses Glasfaserkabel bietet eine zuverlässige und langlebige Lösung für professionelle Installationen. Konzipiert für Glasfasertechniker und anspruchsvolle Netzwerkumgebungen.
Nicht blockierende ArchitekturVoller gleichzeitiger Durchsatz an allen Ports — keine Engpässe bei maximaler Last.
Plug & play, ohne KonfigurationStrom und Netzwerk anschließen — der Switch ist sofort betriebsbereit.
Lüfterlos, geräuschlosVollständig passive Kühlung — ideal für Büros und lärmempfindliche Umgebungen.
Robustes MetallgehäuseVollmetallkonstruktion für Wärmeableitung und professionelle Langlebigkeit.
Integriertes QoSQuality-of-Service-Warteschlangen zur Priorisierung von VoIP-, Video- oder Überwachungsdatenverkehr.
Flexible MontageMontagewinkel im Lieferumfang für 19″-Rack oder Tischaufstellung je nach Bedarf.
Anbieter-Box
Glasfasergehäuse
Glasfaserkabel
Netzwerkgerät
1. Kann ich ein Gerät ohne PoE an einen PoE-Switch anschließen?
Ja, das ist unbedenklich. Der PoE-Switch erkennt automatisch, ob das angeschlossene Gerät Strom benötigt, und liefert ihn nur bei Bedarf.
2. Wie viele Geräte kann ich mit einem einzigen PoE-Switch versorgen?
Das hängt von der Anzahl der verfügbaren Ports (bei uns 4 bis 24 Ports) und der maximalen Leistung des Switches ab (Normen IEEE 802.3af, 802.3at oder 802.3bt). Prüfen Sie die verfügbare Gesamtleistung Ihres Switches und den Verbrauch jedes angeschlossenen Geräts.
3. Funktioniert PoE mit allen Ethernet-Kabeltypen?
Ja, empfohlen wird jedoch ein Ethernet-Kabel der Kategorie 5e oder höher (idealerweise Cat.6), um Signalstabilität und eine sichere Stromversorgung zu gewährleisten.
4. Lassen sich ein Standard-Switch und ein PoE-Switch im selben Netzwerk kombinieren?
Auf jeden Fall. Beide Switch-Typen sind vollständig kompatibel und können nach Ihrem Bedarf kombiniert werden.
5. Muss ein PoE-Switch konfiguriert werden oder funktioniert er sofort (Plug and Play)?
Unsere PoE-Switches funktionieren in der Regel sofort und ohne besondere Konfiguration (Plug and Play). Einige Managed-Modelle benötigen für erweiterte Funktionen jedoch eine einfache Konfiguration.
6. Wie bemesse ich die Gesamtleistung meines PoE-Switches?
Ermitteln Sie den Gesamtverbrauch der Geräte, die Sie anschließen möchten, und wählen Sie einen PoE-Switch, dessen Gesamtleistung diesen Wert leicht übersteigt, um einen optimalen Betrieb zu gewährleisten.
7. Verbraucht ein PoE-Switch im Standby viel Energie?
Nein. Unsere modernen PoE-Switches verfügen über Energiesparfunktionen, die den Verbrauch deutlich senken, wenn sie nicht voll ausgelastet sind.
8. Kann ein PoE-Switch zur Erweiterung des WLAN-Netzes verwendet werden?
Ja. Die Stromversorgung von WLAN-Access-Points ist ein typischer Einsatz eines PoE-Switches und vereinfacht die Installation in Geschäftsgebäuden oder zu Hause.
9. Sollte ich bei einem PoE-Switch einen Überspannungsschutz installieren?
Das wird dringend empfohlen, besonders bei sensiblen Installationen wie Sicherheitssystemen. Ein Überspannungsschutz bewahrt sowohl Ihr Netzwerk als auch Ihre Geräte vor Schäden durch Überspannung oder Blitzschlag.
Right out of the box this POE injector appears to be good manufacturing quality and is as easy and quick to install as any POE injector should be. Durability looks good, both RJ45 and SFP connectors are firm and secure. I am using it with a Unifi U7-Pro, which powered up and worked immediately when plugged in. For the SFP connection I use OM3 multimode fiber and a couple of Cable Matters transceivers into a Netgear switch. Again the SFP port connected immediately and the switch browser-based switch setup and monitoring pages show no errors over days of continuous connections. For those without fiber installed yet, I also tested with a Flypro transceiver to RJ45 and that also worked without any problem. The only issue I ran into is that if knocked or moved it was easy to dislodge the power cord due to a slightly loose power connection. Since the supplied power lead is only approximately 28″ excluding connectors I will be replacing it anyway, but if possible I would deduct half a star. Currently it seems good value, is very easy to get going, and so I would recommend it where SFP is a requirement. My only other advice would be to check the power connector and make sure you get a secure fit.
This PoE injector functions very well. It was super easy to install, and gave me the results I needed. I had never used any PoE devices before getting this. I installed a long line of security cameras and saw a recommendation to use a PoE injector to extend the range. This was a very good value for the price, and provided the extended range I was looking for. I am very happy with this device. It is well made and really extends the functionality of a network.
Outstanding POE injector I used this with my UniFi WiFi 7 U7 pro and it worked absolutely perfectly. The injector is extremely heavy duty and made to last. The SFP port is extremely handy for solid connections. I’m getting full speed of my isp using this injector and my u7 pro. Rock solid connection no lag no high ping rates just a rock solid connection and it does everything I need it to do. Build quality is excellent and not cheap like some of these Poe injectors are. Overall I’m extremely happy with this unit .
This 30W injector performs exactly as expected. It delivers consistent output, is easy to use, and feels well built. Very satisfied with the quality and reliability of this tool.
The 30W PoE Injector with 1x 1.25G SFP slot is good quality have a durable plastic case. The Sfp adapter slid in and locked in place securely. The unit is easy to install being plug and play. No drivers are needed. It was recognized by my devices right away linking to the network both on the fiber end and Ethernet side. It functions well providing fast network service without any packet losses. It also has good poe power budget. The 30W PoE Injector with 1x 1.25G SFP slot is a good value for the money.
Does the job well, nothing fancy but reliable.
Highly recommended. My streaming quality improved immediately. Would buy again without hesitation.
Excellent product. No signal loss detected over the full length. Elfcam is now my go-to brand.
Der Elfcam® – PoE Switch Glasfaser mit 2 Ports SFP 1,25 GB, 8 Ports PoE Gigabit Ethernet 10/100 /1000 ist wunderbar , er holt alle aus der Glasfaser raus was mein Router zur Verfügung stellt .
Con poco ho risolto un grande problema in un villaggio, 1600 posti letto. Sta funzionando da 4 mesi senza intoppi. Cliente soddisfatto!!!